CELL PHONE NINJA

PS3 & PS4 Reballing — The Real Fix for YLOD & BLOD

A reflow is a band-aid. A reball is the repair. We remove your console's main chip, fit brand-new solder spheres, and reattach it at board level — the way the failure actually gets fixed.

★ 4.8 rated on Google
💬 Questions? Message us on WhatsApp — (407) 988-7356
$250 per console — $200 each when you do twoPS3 and PS4 APU / RSX reballing, backed by our 30-day warranty.

✓Why consoles die this way

Your PS3's RSX or your PS4's APU sits on hundreds of tiny solder balls. Years of heating up and cooling down crack those joints — and one day the console stops booting:

Reflow vs. reball — the honest difference: a reflow just reheats the old, cracked solder and hopes it reconnects. It almost always fails again. A reball removes the chip completely, cleans both surfaces, fits fresh solder spheres, and reattaches the chip under a controlled temperature profile. It's the only repair that addresses the actual failure.

→How it works — 4 steps

  1. Board diagnostic — $20We confirm your console is actually a reball candidate before you commit to the full repair. Not every dead console is — and we'll tell you straight if it isn't.
  2. You approve the reballFlat price, confirmed up front. We also confirm your timeline at drop-off — reballing is a specialized process, not a same-day repair.
  3. The reballChip removed, surfaces cleaned, new solder spheres fitted, chip reattached, and the board fully tested under load.
  4. Pickup with warrantyYour console goes home tested and backed by our 30-day warranty.

$Prices — flat, in writing

ServicePrice
Board diagnostic — confirms your console is a reball candidate$20
PS3 reballing (RSX) — any model$250
PS4 reballing (APU) — Fat, Slim or Pro$250
Two consoles — reball both and save$200 each

Reballing is a specialized board-level service — the $20 diagnostic is separate and is not credited toward the reball price. Every reball is covered by our 30-day warranty.

Own a backwards-compatible PS3 (CECHA01 / CECHB01 / CECHE01)? Ask us about the Frankenstein conversion — replacing the failure-prone 90nm RSX with a reliable 40nm RSX so the YLOD doesn't come back.

?Frequently asked questions

How is this different from a reflow?

A reflow reheats the existing cracked solder joints — a temporary fix that typically fails again in weeks or months. Reballing replaces every solder sphere under the chip with fresh solder. It's more work, and it's the repair that lasts.

How long does it take?

Reballing is a specialized process. We confirm your exact timeline at drop-off, after the diagnostic — before you pay for the repair.

What if my console can't be fixed?

That's what the $20 diagnostic is for. If the board shows your console isn't a reball candidate — or the chip itself is dead — we'll tell you before you spend the $250.

Do you take consoles from other repair shops?

Yes — board-level work is what other Orlando shops send to us. If you run a shop, message us about B2B board repair.

Is there a warranty?

Yes — every reball is backed by our 30-day warranty.

✎Start with a diagnostic

Tell us which console you have and what it does — we'll contact you to set up your $20 board diagnostic. Or just walk in, no appointment needed.

By submitting, you agree to be contacted about your repair by phone, text or email.

✅

We got it!

We'll contact you shortly to set up your diagnostic.

Bringing your console in? We're at:

Cell Phone Ninja
8421 S Orange Blossom Trail
Suite 103
Orlando, FL 32809
Mon–Sat 10 AM–6 PM · (407) 988-7356